About Network set up wizard
Video Tutorial: - Learn how to connect the WT-5 wireless transmitter to the D4/D4S DSLRs and set the camera up for wireless networking.There are a few different ways that professional photographers can connect to a computer while shooting. These include being tethered directly using a USB or FireWire cable (depending upon the camera) or using network connections to connect via an Ethernet cable or wirelessly.For the D4 and D4S specifically, you can use either the built-in Ethernet port or the WT-5 Wireless Transmitter to connect over Wi-Fi®. In this article and accompanying video, we’ll show you how to set up and configure both options.Getting StartedTo start, you will need: your D4 or D4S, WT-5, the Wireless Transmitter Utility, your wireless router with its SSID or network name and encryption key or password, the USB cable that came with the camera and the computer you’re going to connect to.Networking OptionsThe D4s offers photographers a choice between the following networking options types:FTP upload and image transfer:This type of connection allows you to upload existing photos and movies to a computer set up as a FTP server.With the camera control option, you can control the camera using Nikon’s optional Camera Control Pro 2 software.HTTP Server:This type of connection allows you to view and take pictures remotely using a browser-equipped computer or mobile device. Connecting the Camera and WT-5 To set up the WT-5 wireless transmitter for Image Transfer, in the set-up menu, select Network, then highlight Choose hardware and navigate to the hardware list.Select WT-5 and press the OK to select the highlighted option and return to the network menu.Navigate to the Network Connection and select Enable.Use the Connection Wizard to create a network profile.Under Network settings, select Create profile.After you select Create profile, highlight the Connection wizard and press the right side of the multi-selector pad to start the connection wizard.Select PC Image transfer method.Enter a profile name and press OK when done.Use the menu to search for the wireless network and then select it from the menu. If asked, enter the encryption key or password.The green LED will light up as the camera attempts to connect to your Wi-Fi network. If you enter the password incorrectly, the LED will blink Red. Once a Wi-Fi connection has been made, the LED will blink Green.Once connected, the camera will ask if you want the Connection Wizard to copy the profile to the computer. By Choosing yes, it will do this and pair the camera with the computer.Connect the camera to the computer via USB. The camera will prompt you to start the Wireless Transmitter Utility on your computer at this point. Do so, and once complete, remove the USB cable.You’re now set up
Key features of the Network set up wizard that are enabled through these drivers include:
- SETTING UP OF NATION-WIDE NETWORK OF
- How to Set up a Network Drive on
- Set up the Mininet network simulator
- Set up a Scan to Network Profile
- Set up Android Emulator networking
- How to set up and manage a Network
- Set Up Computer Wizard in The Network Encyclopedia
You can use the Web Setup Wizard or the Quick Setup Wizard to create a new configuration for your Firebox. If you want to start over with a new default configuration, you can reset the Firebox to factory-default settings and run one of the setup wizards again.Both setup wizards connect to WatchGuard to download the device feature key that enables configuration of licensed features and services. You can use either of these setup wizards to set up your Firebox with a new configuration: Web Setup Wizard To use the Web Setup Wizard, you connect to Fireware Web UI on the Firebox. You can use the Web Setup Wizard to create a new configuration with recommended policies and settings, or restore a configuration from a backup image. In Fireware v12.5.3 and higher, the Web Setup Wizard also supports two configuration download options that are not supported in the Quick Setup Wizard: RapidDeploy — Download a configuration created for RapidDeploy Cloud-Managed — Download a configuration from WatchGuard Cloud Before you use the Cloud-Managed option, you must add the Firebox to WatchGuard Cloud as a Cloud-Managed device. For instructions to run the Web Setup Wizard, go to Run the Web Setup Wizard. Quick Setup Wizard To use the Quick Setup Wizard, you must install WatchGuard System Manager on a Windows computer. The Quick Setup Wizard discovers the Firebox on your network and then helps you to create a new configuration with recommended policies and settings. For instructions to run the Quick Setup Wizard, go to Run the WSM Quick Setup Wizard. For a wireless Firebox that runs Fireware 12.5.3 or higher, you can use either setup wizard to enable wireless access to the trusted network. For more information about policies and services the setup wizards configure, go to Setup Wizard Default Policies and Settings. After you run the setup wizard you can further customize your security policies to meet the needs of your network. For more information, go to Complete Your Installation.
